OK, for all of you that have the Artfibras undertail, I need your help. I cannot seem to get the seat lock cable to reach the new location. I have seen others on this site that have the lock cylinder on the right, so I am wondering what I am missing here.

For some reason there are no instructions with this kit. I also got the hugger, and as I suspected, no mounting holes. This is not a big deal, just kinda sucks.

Anyway, please help with the lock cylinder situation. Thanks.

Route the cable under the seat locking mechanism. It's a really tight 180 degree turn but the cable works once you actually get it locked. I will take a picture when I get home and show you how I did it.

OK, with your suggestion I was able to get the undertail installed. However upon looking closer at the hugger it seems that it doesn't want to center over the wheel.

The mount at the front of the swingarm on the chain side works better if it is inside the mounting tab (but rubs the chain). If I move it to the outside as I would expect it to be, the hugger will not center over the wheel.

It's not an exact fit, no but once you mount it and screw everything in, it looks fine. It will pull apart some and look alright. At least it did when I had everything mounted.