One of my rear lenses is missing, and it's a special order part--so its almost cheaper for me to just replace the whole blinkers. So I bought some and realized I didn't know there were two different kinds. From reading some of the threads I came to realize that I need a three wire replacement. But what I want to know is this--Do I have to cut the wires, or is there a place that I can just unplug them, and plug in the new ones. Alos, any reccomendations--I care more about people seeing my blinkers, then style--though I do not feel that these ideas are mutually exclusive. Thanks :?

remember to change your blinker fluid too

One of my rear lenses is missing, and it's a special order part--so its almost cheaper for me to just replace the whole blinkers.
D'lo, are you just missing the orange lense? If so, I've got all of my stock blinkers that are just collecting dust. All of them have them have their wires clipped, so no one seems to be willing to pay for them. If all you need is the lense I would be happy to throw one in a bubble envelope and mail it to you (assuming you live in the U.S.).

you will need to remove your headlight to unplug your stock front signals.the wiring is located in the black bucket behind your headlight assembly.

Thanks to Darktint for the offer, but the more I looked at those big orange lights, the more I wanted them off. The rear lights on the 04 have only two wires, where the front has three (running and blinkers). Changing the lights was simply a matter of unscrewing the old lights, cutting the wires, soldering on the new ones, and bolting back in place. I paid 17 bucks for small arrow turnsignals, and they do not look too bad. I used the original hole, but the stock stocks have two holes. It took about fifteen minutes to for the first side, and five minutes for the other side. Looks okay. I will take a picture to show you all. Also, since is was in there, I just changed the blinker fluid.. They were out of the Honda brand, so I just got the synthethic Repsol.